EP Series Carbon Block Cartridges are manufactured using a process that yields a cartridge with a nominal 5-micron filtration rating and high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.

• Industry standard chlorine, bad taste and odor cartridge at an economical value
• Better chlorine reduction and 5 micron sediment filtration for residential chlorinated water supplies
• Standard 2.5" diameter by 10" length
• Better dirt holding capacity, minimizing pressure drop through life of cartridge

These cartridges are protected by a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges. EP Series Cartridges make an ideal choice for a wide range of residential, food service, commercial and industrial applications.

EP-10 PENTEK CARBON BLOCK CARTRIDGE

MODEL: EP-10
MAXIMUM DIMENSIONS: 2.89''x9.75'' ( 73mm x 248mm)
RATING* (NOMINAL): 5 micron
INITIAL ΔP (PSI) @FLOW RATE (GPM): 1.7 psi @ 1.0 gpm (0.12 bar 2 3.8Lpm)
CHLORINE TASTE & ODOR REDUCTION @ FLOW RATE: >6,000 gallons @ 1.0 gpm (>22,712 L @ 3.8Lpm)

FEATURES/BENEFITS

High dirt-holding capacity maximizes utilization of the carbon block*

Highly effective bad taste & odor and chlorine taste & odor reduction*

Nominal 5-micron rating

SPECIFICATIONS

Filter Media – Bonded PAC

Endcaps – Polypropylene

Outer Wrap – Polyolefin

Netting – Polyethylene

Gaskets – Buna-N

Temperature Rating – 40-180°F (4.4-82.2°C)

* Based on manufacturer's internal testing.